Help reduce the possibility of any breakage during the pulley removal process with a Metco Pin Holding Tool. This tool was created to help with the removal of the original supercharger pulley on the Hellcat. After the supercharger snout has been removed and placed on a bench, this tool slides over the pins at the rear of the snout to hold the supercharger shaft stationary while the pulley is unscrewed at the front. This allows you to spread the load over all eight pins, which is far better than using a pry bar against two pins.
This heavy-duty tool is laser cut from 1/4" steel and precisely machined to match the pin pattern and pin diameter. The hole in the center of the pin holes is designed to allow a 15mm socket to pass through to hold the shaft bolt if needed, and the slot at the handle-end will allow you to thread a snout fastener to positively lock the tool in place while the original supercharger pulley is unscrewed.
Important Note: This tool requires an adapter to work on the larger supercharger used in the Demon and Redeye Application. To add the adapter to your order, please select the appropriate option from the drop-down menu.