The Fabtech 5″ Basic System with Performance Shocks is the perfect kit for those looking for an extreme lift, but still want to keep the factory payload and ride quality with minimal parts. The Fabtech 5″ Basic System with Performance Shocks retains the stock springs with angular steel spacers which allows you to keep Chrysler′s front spring bow to aid in the unique alignment specs and ride quality. Fabtech was able to keep the stock payload by using steel spacers for the rear coil springs. Also unique to this system is the steel front bump extensions. Unlike the extra long urethane bump stops found in other aftermarket suspensions, these steel front bump extensions will not blow out.

Features:

• 5″ Lift
• Front and Rear Performance Shocks
• 1/4″ Thick Steel Brackets
• Front and Rear Track Bar Drop Brackets
• Steel Front Bump Extensions

Tire Fitment:

• 37x12.50/R17 tires w/ 17x9 wheels w/ 5″ BS w/ minor trimming
• 37x12.50/R18 tires w/ 18x9 wheels w/ 5″ BS w/ minor trimming
• 37x13.50/R20 tires w/ 20x9.5 wheels w/ 5″ BS w/ minor trimming
• 37x13.50/R22 tires w/ 22x9.5 wheels w/ 5″ BS w/ minor trimming

The Fabtech 5″ Basic System with Dirt Logic Shocks is the perfect kit for those looking for an extreme lift and great off-road performance, but still want to keep the factory payload and ride quality with minimal parts. The Fabtech 5″ Basic System with Dirt Logic Shocks retains the stock springs with angular steel spacers which allows you to keep Chrysler′s front spring bow to aid in the unique alignment specs and ride quality. Fabtech was able to keep the stock payload by using steel spacers for the rear coil springs. Also unique to this system is the steel front bump extensions. Unlike the extra long urethane bump stops found in other aftermarket suspensions, these steel front bump extensions will not blow out.

Features:

• 5″ Lift
• Front and Rear Dirt Logic Shocks
• 1/4″ Thick Steel Brackets
• Front and Rear Track Bar Drop Brackets
• Steel Front Bump Extensions

Tire Fitment:

• 37x12.50/R17 tires w/ 17x9 wheels w/ 5″ BS w/ minor trimming
• 37x12.50/R18 tires w/ 18x9 wheels w/ 5″ BS w/ minor trimming
• 37x13.50/R20 tires w/ 20x9.5 wheels w/ 5″ BS w/ minor trimming
• 37x13.50/R22 tires w/ 22x9.5 wheels w/ 5″ BS w/ minor trimming

The Fabtech 5″ Radius Arm System with Performance Shocks is the perfect kit for those looking for an extreme lift, but still want to keep the factory payload and ride quality. Unlike the Basic Kit, the Radius Arm System comes with replacement tubular Radius Arms with exclusive dimple die side plates for superior strength. These new Radius Arms provide increased caster for oversized tires and lifted applications. The Fabtech 5″ Radius Arm System retains the stock springs with angular steel spacers which allows you to keep Chrysler′s front spring bow to aid in the unique alignment specs and ride quality. Fabtech was also able to keep the stock payload by using steel spacers for the rear coil springs. Also unique to this system is the steel front bump extensions. Unlike the extra long urethane bump stops found in other aftermarket suspensions, these steel front bump extensions will not blow out.

Features:

• 5″ Lift
• Dimple Die, Tubular Radius Arms
• Front and Rear Performance Shocks
• 1/4″ Thick Steel Brackets
• Front and Rear Track Bar Drop Brackets
• Steel Front Bump Extensions

Tire Fitment:

• 37x12.50/R17 tires w/ 17x9 wheels w/ 5″ BS w/ minor trimming
• 37x12.50/R18 tires w/ 18x9 wheels w/ 5″ BS w/ minor trimming
• 37x13.50/R20 tires w/ 20x9.5 wheels w/ 5″ BS w/ minor trimming
• 37x13.50/R22 tires w/ 22x9.5 wheels w/ 5″ BS w/ minor trimming

The Fabtech 5″ Radius Arm System with Dirt Logic Shocks is the perfect kit for those looking for an extreme lift with great off-road performance, but still want to keep the factory payload and ride quality. Unlike the Basic Kit, the Radius Arm System comes with replacement tubular Radius Arms with exclusive dimple die side plates for superior strength. These new Radius Arms provide increased caster for oversized tires and lifted applications. The Fabtech 5″ Radius Arm System retains the stock springs with angular steel spacers which allows you to keep Chrysler′s front spring bow to aid in the unique alignment specs and ride quality. Fabtech was also able to keep the stock payload by using steel spacers for the rear coil springs. Also unique to this system is the steel front bump extensions. Unlike the extra long urethane bump stops found in other aftermarket suspensions, these steel front bump extensions will not blow out.

Features:

• 5″ Lift
• Dimple Die, Tubular Radius Arms
• Front and Rear Dirt Logic Shocks
• 1/4″ Thick Steel Brackets
• Front and Rear Track Bar Drop Brackets
• Steel Front Bump Extensions

Tire Fitment:

• 37x12.50/R17 tires w/ 17x9 wheels w/ 5″ BS w/ minor trimming
• 37x12.50/R18 tires w/ 18x9 wheels w/ 5″ BS w/ minor trimming
• 37x13.50/R20 tires w/ 20x9.5 wheels w/ 5″ BS w/ minor trimming
• 37x13.50/R22 tires w/ 22x9.5 wheels w/ 5″ BS w/ minor trimming

The Fabtech 5″ Basic System with Performance Shocks is the perfect kit for those looking for an extreme lift, but still want to keep the factory payload and ride quality with minimal parts. The Fabtech 5″ Basic System with Performance Shocks retains the stock springs with angular steel spacers which allows you to keep Chrysler′s front spring bow to aid in the unique alignment specs and ride quality. Fabtech was able to keep the stock payload by using steel spacers for the rear coil springs. Also unique to this system is the steel front bump extensions. Unlike the extra long urethane bump stops found in other aftermarket suspensions, these steel front bump extensions will not blow out.

Features:

• 5″ Lift
• Front and Rear Performance Shocks
• 1/4″ Thick Steel Brackets
• Front and Rear Track Bar Drop Brackets
• Steel Front Bump Extensions
• Rear Block
• U-bolt

Tire Fitment:

• 37x12.50/R17 tire w/ 17x9 wheels w/ 5″ BS w/ minor trimming
• 37x12.50/R18 tire w/ 18x9 wheels w/ 5″ BS w/ minor trimming
• 37x13.50/R20 tire w/ 20x9.5 wheels w/ 5″ BS w/ minor trimming

The Fabtech 5″ Basic System with Dirt Logic Shocks is the perfect kit for those looking for an extreme lift and great off-road performance, but still want to keep the factory payload and ride quality with minimal parts. The Fabtech 5″ Basic System with Dirt Logic Shocks retains the stock springs with angular steel spacers which allows you to keep Chrysler′s front spring bow to aid in the unique alignment specs and ride quality. Fabtech was able to keep the stock payload by using steel spacers for the rear coil springs. Also unique to this system is the steel front bump extensions. Unlike the extra long urethane bump stops found in other aftermarket suspensions, these steel front bump extensions will not blow out.

Features:

• 5″ Lift
• Front and Rear Dirt Logic Shocks
• 1/4″ Thick Steel Brackets
• Front and Rear Track Bar Drop Brackets
• Steel Front Bump Extensions
• Rear Block
• U-bolt

Tire Fitment:

• 37x12.50/R17 tire w/ 17x9 wheels w/ 5″ BS w/ minor trimming
• 37x12.50/R18 tire w/ 18x9 wheels w/ 5″ BS w/ minor trimming
• 37x13.50/R20 tire w/ 20x9.5 wheels w/ 5″ BS w/ minor trimming

The Fabtech 5″ Radius Arm System with Performance Shocks is the perfect kit for those looking for an extreme lift, but still want to keep the factory payload and ride quality. Unlike the Basic Kit, the Radius Arm System comes with replacement tubular Radius Arms with exclusive dimple die side plates for superior strength. These new Radius Arms provide increased caster for oversized tires and lifted applications. The Fabtech 5″ Radius Arm System retains the stock springs with angular steel spacers which allows you to keep Chrysler′s front spring bow to aid in the unique alignment specs and ride quality. Fabtech was also able to keep the stock payload by using steel spacers for the rear coil springs. Also unique to this system is the steel front bump extensions. Unlike the extra long urethane bump stops found in other aftermarket suspensions, these steel front bump extensions will not blow out.

Features:

• 5″ Lift
• Dimple Die, Tubular Radius Arms
• Front and Rear Performance Shocks
• 1/4″ Thick Steel Brackets
• Front and Rear Track Bar Drop Brackets
• Steel Front Bump Extensions
• Rear Block
• U-bolt

Tire Fitment:

• 37x12.50/R17 tire w/ 17x9 wheels w/ 5″ BS w/ minor trimming
• 37x12.50/R18 tire w/ 18x9 wheels w/ 5″ BS w/ minor trimming
• 37x13.50/R20 tire w/ 20x9.5 wheels w/ 5″ BS w/ minor trimming

The Fabtech 5″ Radius Arm System with Dirt Logic Shocks is the perfect kit for those looking for an extreme lift with great off-road performance, but still want to keep the factory payload and ride quality. Unlike the Basic Kit, the Radius Arm System comes with replacement tubular Radius Arms with exclusive dimple die side plates for superior strength. These new Radius Arms provide increased caster for oversized tires and lifted applications. The Fabtech 5″ Radius Arm System retains the stock springs with angular steel spacers which allows you to keep Chrysler′s front spring bow to aid in the unique alignment specs and ride quality. Fabtech was also able to keep the stock payload by using steel spacers for the rear coil springs. Also unique to this system is the steel front bump extensions. Unlike the extra long urethane bump stops found in other aftermarket suspensions, these steel front bump extensions will not blow out.

Features:

• 5″ Lift
• Dimple Die, Tubular Radius Arms
• Front and Rear Dirt Logic Shocks
• 1/4″ Thick Steel Brackets
• Front and Rear Track Bar Drop Brackets
• Steel Front Bump Extensions
• Rear Block
• U-bolt

Tire Fitment:

• 37x12.50/R17 tire w/ 17x9 wheels w/ 5″ BS w/ minor trimming
• 37x12.50/R18 tire w/ 18x9 wheels w/ 5″ BS w/ minor trimming
• 37x13.50/R20 tire w/ 20x9.5 wheels w/ 5″ BS w/ minor trimming