Fabtech Lift Kits for your 2013 Dodge Cummins 6.7L DieselFabtech 4.5″ Performance System w/ Performance Shocks
Vehicle:
2013 2500 / 3500 Dodge Cummins 6.7L 4WD
The Fabtech 4.5″ Performance System with Performance Shocks is the perfect kit for those looking for a medium lift on their 2013 Dodge Cummins Trucks. The kit comes with brand new front Coil Springs, 1 3/4″ upper and lower Control Arm Links, Pitman Arm, Trac bar bracket, Bump Stops, rear blocks, and U-bolts. This kit comes with everything you need and some cutting may be required.
Attention:
- Non dually models only.
- Will not fit 2013 3500 trucks w/radius arm suspension.
(Part# FAB K3037) Please Select The Parts According the Quantity
Fabtech 4.5″ Performance System w/ Dirt Logic Shocks
Vehicle:
2013 2500 / 3500 Dodge Cummins 6.7L 4WD
The Fabtech 4.5″ Performance System with Dirt Logic Shocks is the perfect kit for those looking for a medium lift and light off road use on their 2013 Dodge Cummins Trucks. The kit comes with brand new front Coil Springs, 1 3/4″ upper and lower Control Arm Links, Pitman Arm, Trac bar bracket, Bump Stops, rear blocks, and U-bolts. This kit comes with everything you need and some cutting may be required.
Attention:
- Non dually models only.
- Will not fit 2013 3500 trucks w/radius arm suspension.
(Part# FAB K3037DB) Please Select The Parts According the Quantity
Front Dirt Logic 2.25 Shock
Quantity Needed: 2
Part#
FAB FTS810401
Rear Dirt Logic 2.25 Shock
Quantity Needed: 2
Part#
FAB FTS810361
Fabtech 6″ Performance System w/ Performance Shocks
Vehicle:
2013 2500 / 3500 Dodge Cummins 6.7L 4WD
The Fabtech 6″ Performance System with Performance Shocks is the perfect kit for those looking for an extreme lift and good off-road capability on their 2013 Dodge Cummins Trucks. The kit comes with brand new front Coil Springs, 1.75″ OD heavy wall Upper and Lower Control Arm Links, Transmission Mount, Pitman Arm, Trac bar bracket, Bump Stops, End Links, rear blocks, and U-bolts. This kit comes with everything you need and some cutting may be required.
Attention:
- Non dually models only.
- Will not fit 2013 3500 trucks w/radius arm suspension.
- Does not fit standard cab models.
- Fits automatic transmission only.
Features:
- 6″ Lift
- Front and Rear Performance Shocks
- 1.75″ OD Heavy Wall Upper and Lower Control Arm Links
- Transmission Mount
- Trac Bar Bracket
- Bump Stops
- End Links
- Rear Blocks
- U-bolts
Tire Fitment:
- 37/12.50R17 tires w/ 17x9 wheels w/ 5″ BS w/ minor trimming
- 37/13.50R18 tires w/ 18x9 wheels w/ 5″ BS w/ minor trimming
- 37/13.50R20 tires w/ 20x9 wheels w/ 5″ BS w/ minor trimming
(Part# FAB K3038) Please Select The Parts According the Quantity
Fabtech 6″ Performance System w/ Dirt Logic Shocks
Vehicle:
2013 2500 / 3500 Dodge Cummins 6.7L 4WD
The Fabtech 6″ Performance System with Dirt Logic Shocks is the perfect kit for those looking for an extreme lift and great off-road capability on their 2013 Dodge Cummins Trucks. The kit comes with brand new front Coil Springs, 1.75″ OD heavy wall Upper and Lower Control Arm Links, Transmission Mount, Pitman Arm, Trac bar bracket, Bump Stops, End Links, rear blocks, and U-bolts. This kit comes with everything you need and some cutting may be required.
Attention:
- Non dually models only.
- Will not fit 2013 3500 trucks w/radius arm suspension.
- Does not fit standard cab models.
- Fits automatic transmission only.
Features:
- 6″ Lift
- Front and Rear Dirt Logic Shocks
- 1.75″ OD Heavy Wall Upper and Lower Control Arm Links
- Transmission Mount
- Trac Bar Bracket
- Bump Stops
- End Links
- Rear Blocks
- U-bolts
Tire Fitment:
- 37/12.50R17 tires w/ 17x9 wheels w/ 5″ BS w/ minor trimming
- 37/13.50R18 tires w/ 18x9 wheels w/ 5″ BS w/ minor trimming
- 37/13.50R20 tires w/ 20x9 wheels w/ 5″ BS w/ minor trimming
(Part# FAB K3038DB) Please Select The Parts According the Quantity
Front Dirt Logic 2.25 Shock
Quantity Needed: 2
Part#
FAB FTS810721
Rear Dirt Logic 2.25 Shock
Quantity Needed: 2
Part#
FAB FTS810531
Fabtech 6″ Long Arm System w/ Performance Shocks
Vehicle:
2013 2500 / 3500 Dodge Cummins 6.7L 4WD
The Fabtech 6″ Long Arm System with Performance Shocks is the perfect kit for those looking for an extreme lift with increased travel and ride quality on their 2013 Dodge Cummins Trucks. The Fabtech 6″ Long Arm System with Performance Shocks allows for increases off-road use by adding more front axle articulation, while smoothing out the highway ride by eliminating the factory short links The kit comes with brand new front Coil Springs, 2″ OD tubing with a 1″ uniball Upper and Lower Control Arm Links with urethane bushings, 1/4″ thick steel brackets, Transmission Mount, Pitman Arm, Trac bar bracket, Bump Stops, End Links, rear blocks, and U-bolts. This kit comes with everything you need and some cutting may be required.
Attention:
- Non dually models only.
- Will not fit 2013 3500 trucks w/radius arm suspension.
- Does not fit standard cab models.
- Fits automatic transmission only.
Features:
- 6″ Lift
- Front and Rear Performance Shocks
- 1.75″ OD Heavy Wall Upper and Lower Control Arm Links
- Transmission Mount
- Trac Bar Bracket
- Bump Stops
- End Links
- Rear Blocks
- U-bolts
Tire Fitment:
- 37/12.50R17 tires w/ 17x9 wheels w/ 5″ BS w/ minor trimming
- 37/13.50R18 tires w/ 18x9 wheels w/ 5″ BS w/ minor trimming
- 37/13.50R20 tires w/ 20x9 wheels w/ 5″ BS w/ minor trimming
(Part# FAB K3036) Please Select The Parts According the Quantity
Fabtech 6″ Long Arm System w/ Dirt Logic Shocks
Vehicle:
2013 2500 / 3500 Dodge Cummins 6.7L 4WD
The Fabtech 6″ Long Arm System with Dirt Logic Shocks is the perfect kit for those looking for an extreme lift with amazing off-road performance on their 2013 Dodge Cummins Trucks. The Fabtech 6″ Long Arm System with Performance Shocks allows for increases off-road use by adding more front axle articulation, while smoothing out the highway ride by eliminating the factory short links The kit comes with brand new front Coil Springs, 2″ OD tubing with a 1″ uniball Upper and Lower Control Arm Links with urethane bushings, 1/4″ thick steel brackets, Transmission Mount, Pitman Arm, Trac bar bracket, Bump Stops, End Links, rear blocks, and U-bolts. This kit comes with everything you need and some cutting may be required.
Attention:
- Non dually models only.
- Will not fit 2013 3500 trucks w/radius arm suspension.
- Does not fit standard cab models.
- Fits automatic transmission only.
Features:
- 6″ Lift
- Front and Rear Dirt Logic Shocks
- 1.75″ OD Heavy Wall Upper and Lower Control Arm Links
- Transmission Mount
- Trac Bar Bracket
- Bump Stops
- End Links
- Rear Blocks
- U-bolts
Tire Fitment:
- 37/12.50R17 tires w/ 17x9 wheels w/ 5″ BS w/ minor trimming
- 37/13.50R18 tires w/ 18x9 wheels w/ 5″ BS w/ minor trimming
- 37/13.50R20 tires w/ 20x9 wheels w/ 5″ BS w/ minor trimming
(Part# FAB K3036DB) Please Select The Parts According the Quantity
Front Dirt Logic 2.25 Shock
Quantity Needed: 2
Part#
FAB FTS810721
Rear Dirt Logic 2.25 Shock
Quantity Needed: 2
Part#
FAB FTS810531



















